Ladies and Gentlemen,
I am happy to announce that my team and I have finally started stocking pallet racking. Now of course, depending on the quantities needed we might have to order in more inventory for a large job but none the less, we have some in stock! I have been storing all of my inventory on this racking for years so I am very excited to finally start selling something that has held up so well for me over all of the years. I brought in several different sizes of beams, uprights and decking so I will highlight all of these for you in the sections below.
Starting with our beams, these are used in pairs and go horizontally in the pallet racking setup to support the wire decks. I have brought in 4 different sizes for you to choose from so please see the sizes listed below:
4″ x 96″ with a load capacity of 5260lbs
4-1/2″ x 108″ with a load capacity of 5440lbs
5-1/2″ x 120″ with a load capacity of 7380lbs
6″ x 144″ with a load capacity of 6740lbs
The beams will be determined based on your preferences and requirements for your warehouse setup.
Next in line are our uprights. These are the frames that are set up vertically in the pallet racking setup which support and lock the beams in place. I have brought in 3 different sizes for you to choose from so please see the sizes below:
42″ x 120″ with a load capacity of 22,780lbs
42″ x 144″ with a load capacity of 22,780lbs
42″ x 192″ with a load capacity of 31,340lbs
Again, the size and setup of your warehouse will determine which size is the best fit for you.
Lastly, I would like to highlight our wire decks. These are the metal decks which support the units that you are storing on these shelves. I have brought in 3 different sizes for you to choose from so please see the sizes below:
42″ x 46″ with a load capacity of 2,957lbs
42″ x 53″ with a load capacity of 2,957lbs
42″ x 58″ with a load capacity of 2,957lbs
The setup of your pallet racking above will determine which deck is the right fit for your pallet racking setup.
When you do come across your pallet racking project, my team and I are available for free on-site consultations to take measurements and map out your project for you. We will then be able to determine which items will be used in your setup and we are happy to setup your installation for you as well. We look forward to assisting you with all of your material handling needs and hope to hear from you soon!
The Caster Guy